 |
Premium Plus Hydraulic
Oils |
 Engine
Armour Premium Plus Hydraulic Antiwear Oils contain EP agents and chemical
components to control wear, oxidation, sludge, corrosion, foaming, and
to promote water separation. These oils are formulated to lubricate hydraulic
systems that require wear protection, rust protection, and antioxidancy.
The product is specifically formulated to provide robust pump and filtration
performance in excess of 5,000 hours, even in the presence of incidental
water contamination.
Engine Armour Premium Plus Hydraulic Oils are formulated
to exceed the requirements of all main pump, filter and control valve
OEMs who have hydraulic lubricant specifications. These oils provide
protection to hydraulic systems employing vane, gear and other types
of pumps that require antiwear (boundary-type) protection.
Applications:
(Denison HF-0,1,2), (Vickers M-2950-S, I-2860-S), (Cin.Lamb P-68/69/70,
P-38,54,55,57), (US Steel 126,127,136), (Sunstrand), (Rexroth RE 90220),
(Racine), (Parker), (AAMA DIN51524 part 2), (SEB 181222), (SAE MS1004),
and (AFNOR NF 48-603).
|
Premium Hydraulic
Oils |
 Engine
Armour Premium Hydraulic Oil is blended to offer performance properties
for moderate service applications. These oils are suitable for a wide
variety of applications where moderately inhibited oils are required.
These
products are suitable in pump, compressor and circulating systems. These
oils contain an EP agent and chemical components to impart anti-wear,
oxidation inhabitation, and extreme pressure properties.
Applications:
(Denison HF-1), (US Steel 126), (Rexroth RE 90220), (Parker).
|
All Climate Multi-Viscosity
Oils |
 Engine
Armour All-Climate Multi-Vis Hydraulic Oils are high viscosity index
oils formulated for applications where a wide range of temperature operation
is needed. They contain EP agents and chemical components to control
wear, oxidation, sludge, corrosion, foaming, and to promote water separation.
Theses oils are formulated to lubricated hydraulic systems which require
wear protection, rust protection, and antioxidancy. The product is specifically
formulated to provide robust pump and filtration performance in excess
of 5,000 hours, even in the presence of incidental water contamination.
Engine
Armour All-Climate Multi-Vis Hydraulic Oils are formulated to exceed
the requirements of all main pump, filter and control valve OEMs who
have hydraulic lubricant specifications. These oils provide protection
to hydraulic systems employing vane, gear and other types of pumps that
require antiwear (boundary-type) protection.
Applications: (Denison HF-0,1,2),
(Vickers M-2950-S, I-2860-S), (Cin.Lamb P-68/69/70, P-38,54,55,57), (US
Steel 126, 127,136), (Sunstrand), (Rexroth RE 90220), (Racine), (Parker),
(AAMA DIN51524 part 2), (SEB 181222), (SAE MS1004), and (AFNOR NF 48-603).
|
Ash-Less AW Synthetic
Oils |
 Engine
Armour Ash-less Premium AW Synthetic Hydraulic Oils use full synthetic
base stocks coupled with a robust ash-less additive system to form a
superior multipurpose antiwear hydraulic fluid. These oils are designed
for use in hydraulic systems, compressors, circulating/bearing applications
and turbine applications. Where either EP or non-EP use is indicated.
They contain EP agents and chemical components to control wear, oxidation,
sludge, corrosion, foaming, and to promote water separation. These oils
are formulated to lubricate hydraulic systems which require wear protection,
rust protection, and antioxidancy.
The product is specifically formulated
to provide robust pump and filtration performance in excess of 8,000
hours, even in the presence of incidental water contamination.
Engine
Armour Ash-less Premium AW Synthetic Hydraulic Oils are formulated to
exceed the requirements of all main pump, filter and control valve OEMs
who have hydraulic lubricant specifications. These oils provide protection
to hydraulic systems employing vane, gear and other types of pumps that
require antiwear (boundary-type) protection.
Applications: (Denison HF-0,1,2),
(Vickers M-2950-S, I-2860-S), (Cin.Lamb P-68/69/70, P-38,54,55,57), (US
Steel 126, 127,136), (Sunstrand), (Rexroth RE 90220), (Racine), (Parker),
(AAMA DIN51524 part 2), (SEB 181222), (SAE MS1004), and (AFNOR NF 48-603).
|
Biodegradable Antiwear
Oils |
 Engine
Armour Biodegradable Hydraulic AW Oil is formulated to lubricate hydraulic
systems that require wear protection, rust protection, and antioxidancy.
This oil also exhibits strong water separation characteristics, foam
inhibition, thermal stability, filterability, and hydrolytic stability.
The product is specifically formulated as biodegradable oil.
Engine Armour
Biodegradable Hydraulic AW Oil is formulated to operate in systems with
a variety of pump, filter, and control valves where a vegetable oil based
hydraulic lubricant is specified.
Applications: (Denison HF-6), (Rexroth
RE 90221).
|
Paper Machine/Paper
Mill Oils |
 Engine
Armour Paper Machine/Paper Mill Hydraulic Oils meet the formidable challenge
of equipment diversity that hydraulic oil might encounter. Most modern
paper machines have a “wet” end and “dry” end.
The dryer section (a dry end) is exposed to very high temperatures of
super heated steam used in the drying process and may possess hundreds
of roller bearings requiring lubrications.
These oils are formulated
to allow very long service life, possessing excellent oxidation performance,
thermal stability, good demulsibility and good rust protections. A high
level of detergency has been added along with an EP agent and chemical
components to control wear, oxidation, sludge, corrosion and foaming.
The product is specifically formulated to provide robust pump and filtrations
performance in excess of 5,000 hours, even in the presence of incidental
water contamination.
Applications: (Denison HF-0,1,2), (Vickers M-2950-S,
I-2860-S), (Cin.Lamb P-68/69/70, P-38,54,55,57), (US Steel 126, 127,136),
(Sunstrand), (Rexroth RE 90220), (Racine), (Parker), (AAMA DIN51524 part
2), (SEB 181222), (SAE MS1004), and (AFNOR NF 48-603).
|
R&O/Turbine/Compressor
Oils (Non-EP) |
 Engine
Armour R&O Turbine/Compressor (Non EP) Oils are premium oils that
offer superior rust protection and antioxidancy. They also exhibit strong
water separation characteristics, foam inhibition, thermal stability,
filterability, and hydrolytic stability. The product has been specifically
formulated to provide robust filtration performance in the presence of
water contamination and other common contaminants.
These oils have been
formulated to bring some resistance to electrostatic discharge and important
feature in dry climates or in high temperature applications. Engine Armour
Turbine/Compressor (Non EP) Oils are premiums ash-less oils used in the
lubrication of various compressors, turbines, circulating systems, and
pumps.
Applications: (Denison HF-1), (Cin.Lamb P-38,54,55,57), (AAMA
DIN51524 part 1, DIN51515), (AFNOR NF 48-603), ( GEK 32568E,28143A),
(BS 489), (Mil-L17672D).
|
R&O/Turbine/Compressor
Oils (EP) |
 Engine
Armour R&O Turbine/Compressor (EP) Oils are premium oils that bring
superior rust protection and antioxidancy. They also exhibit strong water
separation characteristics, foam inhibition, thermal stability, filterability,
and hydrolytic stability. The product has specifically been formulated
to provide Extreme Pressure and Anti-Wear (EP/AW) performance for systems
with gear reduction drives or hydraulic systems that call for EP/AW performances.
These oils are formulated with ash-less EP/AW chemistry with is designed
to pass FZG and Ryder gear tests.
Engine Armour R&O Turbine/Compressor
(EP) Oils have been formulated to bring some resistance to electrostatic
discharge, an important feature in dry climates or in high temperature
applications. These oils are premium ash-less oils used in the lubrications
of various compressors, turbines, circulating systems, and pumps. The
R&O/Turbine/ Compressor (EP) contains a non-zinc EP system, which
may be used universally in all R&O/Compressor applications, and the
unique performance needs of large turbine power generating units requiring
such chemistry and performance.
Applications: (Denison HF-0,1,2), (Vickers
M-2950-S, I-2860-S), (Cin.Lamb P-68/69/70, P-38,54,55,57), (US Steel
126, 127,136), (Sunstrand), (Rexroth RE 90220), (Racine), (Parker), (AAMA
DIN51524 part 1), (SEB 181222), (SAE MS1004), (AFNOR NF 48-603), (GEK
101941A), (GEK 32568E, 28143A ), (BS 489), (Mil-L-17331H), (Brown HTGD90117).
|
Utility Hydraulic
Oil Medium |
 Engine
Armour Utility Hydraulic Oil Medium is general-purpose hydraulic oil
carefully formulated from a balanced blend of selected base oils. This
product is suitable for a wide variety of applications where inhibited
oils are not required. This type of lubricant is particularly suitable
in systems with high leakage rates or in “once-through” applications.
Applications:
(Denison HF-0). |
/
MSDS
