Industrial Gear Oils (Mineral Oil Base)

Spec Sheet / MSDS

Engine Armour Industrial Gear Oils (Mineral Oil Base) are compounded lubricants containing extreme pressure (EP), anti-wear (AW), anti-rust, antioxidant, yellow metal protection, water separation, and foam inhibition. Primary specifications which are met with these mineral gear oils include US Steel, American Gear Manufacturers Association (AGMA), and Cincinnati Machine.

Engine Armour Industrial Gear Oils (Mineral Oil Base) are ashless, lead-free, low chlorine, and thermally stable. They have good filtration properties and are extremely resistant to gear wear and scuffing.

Applications: (AGMA 9005-D94: EP*, API GL-4, Cincinnati Machine*, Bijur, DIN 51517, GM LS-2, UA Steel 224).

Additional Test Results: Rust Test Pass, ASTM D 665B, Timkin, OK Load, 60lb min, FZG Load Stage Pass, (12 pass), Demulsibility, ASTM D2711 (pass), Oxidation, S-200 (pass), Foam Inhibition, ASTM D892 (pass), Lead-Free.

Industrial Gear Oils (Synthetic Base)

Spec Sheet / MSDS

Engine Armour Industrial Gear Oils (Synthetic Base) are fully synthetic oils compounded to contain extreme pressure (EP), anti-wear (AW), anti-rust, antioxidant, yellow metal protection, water separation, and foam inhibition. These synthetic Based gear oils are formulated with fully synthetic base stocks designed to bring higher levels of oxidation performance. Drain intervals using Engine Armour Industrial Gear Oils (Synthetic Base) are typically significantly longer than industrial mineral based gear oils. Primary specifications which are met with these synthetic gear oils include US Steel, American Gear Manufacturers Association (AGMA), and Cincinnati Machine.

Engine Armour Industrial Gear Oils (Synthetic Base) are ashless, lead-free, low chlorine, and thermally stable. They have good filtration properties and are extremely resistant to gear wear and scuffing. These oils contain an EP agent and chemical components to control wear, oxidation, sludge, corrosion and foaming. These products are formulated in various ISO viscosity grades, with varying high and low temperature properties depending on ambient conditions.

Applications: (AGMA 9005-D94: S*, API GL-4, Cincinnati Machine, Bijur, DIN 51517, GM LS-2, Us Steel 224).

Test Results: Rust Test Pass, ASTM D 665B, Timkin, OK Load, 60lb min, FZG Load Stage Pass, (12 pass), Demulsibility, ASTM D2711 (pass), Oxidation, S-200 (pass), Foam Inhibition, ASTM D892 (pass), Lead-Free.