 |
Rust Prevention
Oils |
 Engine
Armour Rust Prevention Fluids are formulated for use in applications
requiring a robust and effective level of protection that may be applied
by brush, roller, dip or spray. This fluid contains a solvent and various
chemical additives that will prevent corrosion and yellow stain on sheet
metal and will prevent the formation of white rust on galvanized steel.
Evaporation of the solvent provides a protective oily film on the metal.
When the solvent evaporates, a thin, transparent, oily film remains for
rust prevention.
Engine Armour Rust Prevention Fluids are available in
two grades, light and medium. The rust prevention Fluid – Light
offers faster penetration and has a low flash point. The Rust Prevention
Fluid – Medium will give a more stable protective film, which is
suitable for protecting surfaces for longer periods of time. Engine Armour
Prevention Fluids are formulated with mineral base oils and light volatile
solvents.
|
Rolling Oils |
 Engine
Armour Rolling Oils – General Purpose are multipurpose rolling
oils formulated from premium base stocks and using quality additives
that are non-staining. These rolling oils provide wear, rust, and oxidation
protection, and contain lubricity agents to improve the metal finish.
Engine
Armour Rolling Oils – General Purpose are recommended for
use in a variety of rolling applications for ferrous and nonferrous materials.
Applications include iron, steel, aluminum, copper, brass, and other
copper alloys. They are non-staining, do not contain zinc, and provide
very good wear protection for use in hydraulic systems. These oils can
also be used as an exceptional oxidation resistance, foam control, rust
and corrosion protection, and rapid demulsibility.
|
Heat Transfer/Quenching
Oils |
 Engine
Armour Heat Transfer/Quenching Oils are high quality metal heat treating
and quenching oils, with excellent heat transfer properties. Engine Armour
Heat Transfer/Quenching Oils are specifically formulated for use in a
variety of quenching, spraying, and heat treating applications where
a variety of cooling rates are required. As a heavy transfer medium,
this series is recommended for use in closed liquid-phase heat transfer
systems, and open systems where maximum bulk oil temperatures do not
exceed 380 degrees F.
Engine Armour Heat Transfer/Quenching Oils provide
excellent oxidation stability, good rust and corrosion protection, and
uniform cooling of metal parts. In addition they are very thermally stable
and will provide long life. These oils provide excellent deposit-control,
quench acceleration, improved hardening capabilities, and reduced quench
oil reservoir maintenance. Note that it is important not to mix heat
transfer oils with other lubricants as such contamination will impair
thermal and oxidative stability and could disrupt the cooling process.
Engine
Armour Heat Transfer/Quenching Oils exhibit superior cooling rate performance
as measured by the GM quenchometer test, and provide deposit control
that exceeds current industry benchmarks. They also exhibit superior
thermal and oxidation stability when compared to competitive quench oils.
|
Soluble Oils |
 Engine
Armour Soluble Oil 294 is a water-soluble metal cutting oil containing
rust and foam inhibitors and an emulsifier that effectively stabilized
the fluid in soft and hard water. Soluble Oil 294 is recommended for
use in cutting ferrous and no-ferrous metals, in boring milling, and
turning operations. It is designed for machine ability of both ferrous
and non-ferrous metals with ratings of 50 – 100. The formulation
contains no nitrite or phenol and is safe to use in high speed cutting
operations.
Engine Armour Soluble Oil 294 is recommended for machining
operations of plane and shaping, drilling and sawing, and grinding
using dilutions with water at rations of 30:1 for aluminum and copper,
10:1 for copper alloys, 15:1 for ferrous metals. Engine Armour Soluble
Oil 294 is economical, forms a stable emulsion, is foam inhibited,
and offers rust protection for machine and work piece. It is a safe
to use product with no nitrates and phenols.
|
Cutting Oils |
 Engine
Armour Cutting Oils are premium cutting oils formulated with high quality
mineral oils and additives. These oils are designed to aid the cutting,
grinding, or forming of metal and to provide good finish and work piece
quality while extending the life of the machine tools. Both products
identified below are EP and anti-wear formulated without chlorine containing
chemistry.
Engine Armour Cutting Oil 304 high quality general-purpose
oil formulated to provide extreme pressure (EP) properties and friction
modification for a variety of metals. The inactive sulfurized fatty additive
package is not corrosive to aluminum or yellow metals such as copper
or bronze, and is thus non-staining to the metal being worked.
Engine
Armour Cutting Oil 310 is designed for heavy duty, extreme pressure conditions
where an active sulfur agent is desired. This formula also contains a
finishing agent and is primarily formulated for ferrous metals. |
/
MSDS
