 |
Outboard & 2 Cycle TCW-3 Oil |
 Engine
Armour Outboard & 2-Cycle TC-W3 RL engine oil provides the highest
level of protection for high performance, high horse power, two-cycle
marine engines. This oil is certified NMMA (BIA) and it is formulated
to combat wear scuffing and deposits. It is truly a high-temperature
oxidation resistant oil which protects against corrosion, ensures cleanliness,
and provides lubricity for long engine life.
This is an ash-less formulation
that prevents carbon deposit build-up on engine parts, protects against
ring sticking, and spark plug fouling. It is certified RL which means
it has high film strength for improved lubricity that results in increased
engine efficiency, reduced bearing wear and cleaner emissions with less
smoke.
Engine Armour Outboard & 2-Cycle TC-W3 RL engine oil is recommended
for all water cooled two cycle engines, including the performance demands
of Mercury, OMC Johnson/Evinrude, Yamaha, Honda, Kawasaki and many other
engines requiring NMMA TC-W3 RL, TC-W3, TC-W2, or TC-w type oils. These
oils may be used in other air-cooled and water-cooled applications, such
as snowmobiles, personal water craft (PWC), jet skis, lawn mowers, snow
blowers, all-terrain vehicles and many others requiring API service category
TC.
Applications: (TC-W3 NMMA), (API – TA*,TB*, TC), (JASO: FA*,
FB, FC**, FD***), (ISO-L: EGB, EGC**, EGD***).
|
Universal Outboard & 2 Cycle Oil |
 Engine
Armour Universal Outboard & 2-Cycle is an excellent alternative when
economy is a concern yet quality is required for marine and other applications.
This oil is manufactured from a special low ash formula to protect against
corrosion, rust, and wear. This oil is fortified with chemical inhibitors
to assist in keeping engines clean, reduce spark plug fouling and piston
scuffing.
Applications: (API – TA*).
*API -TA is an obsolete spec;
however when checked the oils meet the requirements.
|
Synthetic Blend 2T Motorcycle Oil |
 Engine
Armour Synthetic Blend 2T Motorcycle Oil is a synthetic blend
lubricant formulated for high performance air-cooled 2-cycle motorcycles
and smaller four-cycle engines. It is truly a high-temperature oxidation
resistant oil which protects against corrosion, ensures cleanliness,
and provides lubricity for long engine life. This is a low ash formulation
that prevents carbon deposit buildup on engine parts, and protects against
ring sticking.
This oil is formulated with high-temperature performance
chemistry and special smoke reducing components to give you the ultimate
in engine protection and environmental performance. These oils may be
used in other air-cooled applications, such as snowmobiles, lawn mowers,
string trimmers, air-blowers, snow blowers, all-terrain vehicles and
many others requiring API service category TC, ISOL-EGC, EGD and JASO
FC, FD.
Applications: (API – TA*,TB*, TC), (JASO: FA*, FB, FC,
FD***), (ISO-L: EGB, EGC, EGD***).
*API TA,TB and Jaso FA are obsolete
specs; however where checked the oils meet the requirements.
**Meets
all specifications for FC and EGC except port blocking.
***Suitable for
use for FD and EGD requirements.
|
Universal 2T Motorcycle Oil |
 Engine
Armour Universal 2T Motorcycle Oil is a general-purpose lubricant
designed for air-cooled, two-cycle engines where Engine Armour Synthetic
Blend Super performance is not required. It is formulated with premium
base stocks for motorcycles and higher-temperature applications such
as chain saws, weed-cutters, string trimmers, air blowers, lawn mowers,
snow blowers, and small generators.
Engine Armour Universal 2T Motorcycle
Oil mixes easily with gasoline and should be used in a fuel to oil ration
specified by the equipment manufacturer.
Applications: (API – TA*).
*API TA is an obsolete Spec; however
when checked the oil meet the requirements.
|
4T SM Oils |
 Engine
Armour 4T SM Motorcycle Oils are superior performance formulations
developed specifically for today’s modern four-cycle motorcycle
applications. Blended with high-quality base stocks and performance chemistry,
the Engine Armour 4T SM oils are formulated for superior operation in
high-reving, high-temperature motorcycle engines. These oils are designed
to provide extended wear protection, sludge and varnish protection, and
superior thermal stability.
Engine Armour 4T SM Motorcycle oil is blended
to give superior performance in those engines and transmissions that
have a common sump and require specialized frictional characteristics
for clutches and wet brakes.
Applications: (API – SG, SM), (JASO
4T: MA).
|
4T SG Oils |
 Engine
Armour 4T SG 10w40 Motorcycle Oil is designed to provide wear
protection, sludge and varnish protection, and thermal stability for
superior performance in four-cycle motorcycle applications. Blended with
high-quality base stocks and performance chemistry, the Engine Armour
4T is formulated for superior operation in high-revving, high-temperature
motorcycle engines.
Engine Armour 4T SG 10w40 Motorcycle Oil is blended
to give superior performance in those engines and transmissions that
have common sump and require specialized frictional characteristics for
clutches and wet brakes.
Applications: (API – SG), (JASO 4T: MA).
*Engine Armour 4T SG meets
or exceeds API SG and JASO MA. |
/
MSDS
